SRC-7000 User’s Manual
54
Motion
1.
The Motion Detector will sense any movement and turn on
the LCD automatically.
2.
You can use the function to change the sensitivity of Motion
detector. (Off/ Slow / Medium / Fast ).
3.
Please use
or
to change to sensitivity of Motion
Detector.
4.
The more sensitive, the more easily for SRC-7000 to turn on
its LCD.
5.
You can use the function to change the consumption of
electricity.
6.
Please press
to save your setting or press
to exit
without saving the setting.
Welcome Page
1.
There will be a welcome page when you insert batteries.
2.
Please use
or
to decide if you can see the
welcome page. (Enable/ Disable)
3.
Please press
to save your setting or press
to exit
without saving the setting.
Calibrate
1.
Please use “Calibrate” to adjust the accuracy of LCD when
you find SRC-7000 is not so sensitive a before.
2.
When you are calibrating the LCD, please press the place
where a sigh “X” shows up.
3.
Please refer to Chapter 5.5 for detailed information or press
to exit without saving the setting.
Reset
1.
When you want to reset your SRC-7000, please use the
function. It will erase all your settings in your remote.
2.
There will be a message to confirm your decision. If you
really want to reset your remote, please tap “Yes”. Then you
will reset it right away.
