12
Copyright © 2012 Suntrap Pty Ltd All rights reserved ABN 87 117 052 856
850kpa Pressure and Temperature Relief valve (point J)
Solar return inlet - non-return valve with the purge
valve assembly (point G)
Showing both the Pressure and Temperature Relief valve
(Point J) and solar hot water out connections (Point F) and
(Point S - tempered). (Point T is cold water in to Tempering Valve)
Coupling between the solar collectors (Points M and N)
(Note: actual model may vary)
Part/n FCS002, FCS003
Part/n PTR850
Part/n NRV00A
Part/n SHW00E (Point F),TEMP01, PTR850 (Point J) and
2
nd
sensor receptacle used as Blanking Plug (Point V)
J
J
F
T
V
G
R
S
P
To Point T on
Tempering
Valve
H
From
Solar
Collector
Outlet (K)
(Solar Outlet
Return)
To
Solar
Collector
inlet (L)
via Solar
Pump
(Solar
Recycle)
M and N
6. Completed installation views of assembled parts
Solar Control Kit – Solar pump and Solar Control Unit
Also shows Shut-Off Ball Valve fitted
Cold Water Inlet (Point H) and Tank temperature sensor
receptacle (Point U). Also shows connection to
Tempering Valve (attached to Point H).
Solar collector outlet assembly consisting of the Air Vent
Assembly and solar collector temperature sensor receptacle
Note: The temperature sensor must be installed on the outlet
side of the Solar Collector (Point K)
Solar collector inlet assembly
Part/n SCU20A and SOV00A
Part/n CWI20A (H) and BSR00A (U)
Part/n SWR00A
Part/n SWI00A
U
H
To cold
water in on
Tempering
Valve (T)
P
G
Water Flow
K
Water Flow
