Suntex TC-7310-RS, Руководство по эксплуатации, Страница: 29 / 64

7.6 Relay 1
Enter setup of Relay 1. Select the item to turn the relay 1 function ON / OFF. If you select to
turn on relay 1, set relay 1 as “High set-point” alarm or “Low set-point” alarm. Set the value of
set-point (SP) and Hysteresis (Hys.). Refer to the graph below for the relationship of the
parameters (for high point alarms).
Enter “Relay 2”
Setup
Press or to adjust
Setting Point (SP) value.
Press or
to select to activate
Relay 1. If turned
off, the menu will
proceed to setup of
Relay 2.
Press to confirm it.
Press to confirm it.
Press or
to select Relay 1 as
Hi point or Lo
point alarm.
Press to confirm it.
Press or
to adjust Hysteresis
(Hys.) value
Press to confirm it.
Press to confirm it.
Press or to
select to activate testing of
Relay 1. If turned on, Relay
1 will begin testing, and
RELAY 1 indication lamp
will light up.
High Point Alarm Control
off off
on
on
SP
Hys.
Turbidity/SS
t (sec)
Press to confirm it.
25