Suntex TC-7310-RS, Руководство по эксплуатации, Страница: 24 / 64

7.2 Settings Security Code (Code)
After entering setup mode, select “Code” and press to enter code setting procedure.
The preset settings code is 1111.
Note: The code for settings mode is at a higher security level than the code for calibration. Thus,
the code for setting mode can be used to unlock calibration mode.
Enter “Language” Setup
Press or
Press to confirm it.
When an incorrect passcode is
entered, the display will show
“Error Code”, press to
re-enter, or press to exit.
The first ‘0” of digits ‘0000” will start to
flash. Press or to adjust the value,
and t then press to confirm it and
proceed to the next digit.
Select to turn on or turn off
code protection function. If
turned on, please input a new
passcode. The passcode will
be required when you
re-enter setup mode. Input
the correct passcode to enter
setup mode.
Input new passcode
Press to confirm it.
Press to confirm it.
Press to confirm it.
20