SunTech STP185S-16/Tem, Руководство по установке

Страница: 6 / 10

Version 20150101 Version 20150101
Suntech Module Type
Module Dimension
Length×Width×Thickness
T Series 1324 mmx992 mmx 35 mm
W Series 1640 mm×992 mm×35 mm
V Series 1956 mm×992 mm×40 mm
Attachment guidelines
• Select the proper installation method depending on the load(See below for more
detailed information).
•
With different installation methods, the modules have been tested to withstand
the loads of 2400 Pa, 3800 Pa and 5400 Pa according to IEC 61215 standard, equivalent
of 1600 Pa(0.232psi), 2500 Pa(0.363psi) and 3600 Pa(0.522psi) respectively under UL
1703 standard.
•
The diagrams in the tables below are designed for illustration purpose. For each
installation, modules can be installed either in portrait or landscape mode. If you
integrate our obsolete products and need advice, please contact Suntech Global
Customer Support Department for installation instructions based on older manuals.
No.8
Suntech T series, W series, V series module
No.9
2400 Pa Load *
2400 Pa Wind Load
2400 Pa Snow Load
3800 Pa Load *
3800 Pa Wind Load
3800 Pa Snow Load
5400 Pa Load *
5400 Pa Snow Load
3800 Pa Wind Load
Mounting sy
stem
Clamping sy
stem
**
Attachment to the long frame
Lengt
h
Use four clamps Use four clamps Use six clamps
Clamping sy
stem
**
Attachment to the shor
t frame
Use four clamps on short frame
Use four clamps on the short frame and
two clamps at the center of each long frame
Inser
tion
Sy
stem
Insertion system
Insertion system
Use insertion system on short frame
Insertion system
Insertion system
Use insertion system on a
short frame and two
clamps at the center of
each long frame
Inse
rt
ion system
Inse
rt
ion system
Use an insertion
system on a long
frame
Clamping Zone
From Module Edge to
1/4 Length ± 50mm
Clamping Zone
(100mm)
Use eight mounting holes
(Exclude Ve)
Use four mounting holes
Clamping Zone
(300mm)
A***
A***
A**
*
A***
Clamping Zone
(100mm)
Width
Clamping Zone
From Module Edge to
1/4 Width ± 50mm
Long Frame Centre±150m
m
Long Frame Centre±150m
m
Clamping Z
one
Clamping Z
one
Clamping Zone
From Module Edge to
1/4 Width ± 50mm
Width
No.10