Doc. Title
ST3940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST3940
1.06
0
18-6-19
41 of 54
Once this command is made, some interactions will be made between the server and the device as described in the
‘Meaning’ section
of the table below.
Field
Mark
Value
Meaning
CMD_ID
“Reset”
Re-setting the current parameters values
This command is used to initialize all the parameters with the
values set in the factory of the devices and to reboot the device.
<Example>
[command] ST600CMD;0123456789;02;Reset
[response] ST600CMD;Res;0123456789;308;Reset
10-14. Command on how to Access to maintenance server to check for update
Following table shows command to access to maintenance server directly.
Field
Mark
Valu
e
Meaning
CMD_ID
“ReqConMntSvr”
Access to maintenance server.
<Example>
[command] ST600CMD;0123456789;02;ReqConMntSvr
[response] ST600CMD;Res;0123456789;308;ReqConMntSvrt
