Doc. Title
ST3940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST3940
1.06
0
18-6-19
34 of 54
10. COMMAND FOR VARIOUS USAGES
Description on each factor necessary to make types of these commands is shown in this Chapter.
HDR
DEV_ID
VER
CMD_ID
Field
Marks
Value
Meaning
HDR
“ST600CMD”
Command type.
DEV_ID
10 char
Device ID.
VER
‘02’
Protocol Version.
CMD_ID
String
Control command content.
Commands are classified into two groups such as:
“Commands for General Use”, which have already been explained in the previous chapter.
“Commands for Non-general Use”.
The latter commands are described here as below.
10-1. Command on how to erase all the saved reports.
This command is used if you want to erase all the saved reports and disable the outputs.
Field
Marks
Value
Meaning
CMD_ID
EraseAll
”
This command is used if you want to erase all the saved
reports and disable the outputs.
This command is needed to initialize the device which is to be
delivered to a new customer.
<Example>
[command] ST600CMD;0123456789;02;EraseAll
[response]ST600CMD;Res;0123456789;309;EraseAll
10-2. Command on how to setting the movement distance.
This command is used if you want to set the movement distance..
Field
Marks
Value
Meaning
COMMAND
“SetDist”
meter
Setting movement distance. This command is either followed
