Doc. Title
ST3940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST3940
1.06
0
18-6-19
38 of 54
1 : Turn off GPS chip after acquiring GPS information
at a pre-
defined interval “in parking mode or in driving mode” ,
which is described in the chapter of this document
<Example>
[command]
ST600CMD;0123456789;02;GpsOffMov=0
[response]
ST600CMD;Res;0123456789;309;GpsOffMov
(Note):
In a case that user utilizes t
his option (“1” to be selected in the SyncTrak, a setting tool of Suntech) which is
operational only while the device (in a vehicle, for example) is moving, power of the battery can be consumed less than
in a case that this option is not selected. If this option is selected, however, some of information (e.g. information about
vehicle speed, information about distance) might not be highly precise.
Field
Marks
Value Meaning
COMMAND
“ReqGpsOffMov”
This command is used to request the device to report about
what information ‘GpsOffMov’ has.
<Example>
[command]
ST600CMD;0123456789;02;ReqGpsOffMov
[response]
ST600CMD;Res;0123456789;309;ReqGpsOffMov;0
10-10. Command on how to turn off the device.
This command is made by the server to the device which needs to be turned power off.
Field
Mark
Value
Meaning
CMD_ID
“TurnOff”
How to turn off the device, which is operated under the option
that the power button should not allow the device to be turned
off. The option is described in a chapter of this document,
‘
How
to set ‘Function Parameters’
.
<Example>
[command] ST600CMD;0123456789;02;TurnOff
[response] ST600CMD;Res;0123456789;309;TurnOff
