Sunsystem BURNiT Magna WBS-A 450, Технический паспорт, руководство по установке и эксплуатации

Страница: 10 / 40

TECHNICAL PASSPORT INSTALLATION and OPERATION MANUAL
10-EN
5.
DELIVERY OF THE BOILER
• Inspect the integrity of the packaging upon delivery.
• Check whether all components have been delivered to you.
Boiler scope of delivery includes:
1) Boiler body with boiler doors.
2) Fire irons.
3) Cleaning brush for flue pipes.
4) Technical passport. Installation and operation manual.
5) Service booklet and Warranty card.
If any of the above items are missing, contact your supplier.
6. INSTALLATION OF THE HEATING BOILER
The assembly, installation and setup of boiler must be performed by a
technician authorized for such operations.
Installer must indicate to the user of the installation the minimum
clearances from flammable materials and liquids.
6.1. Requirements:
- Boiler room must be frost-proof;
- Boiler room must allow for continuous access of air necessary to maintain
combustion;
- Boilers must not be placed in inhabitable rooms;
- All boiler rooms must have correctly calculated vent depending on the boiler
output. The vent must be protected by means of a net or grate.
The size of the vent is calculated according to the formula:
А=6,02*Q - where: А - area of the vent in cm
2
, Q - boiler output in kW.
- Remove the packaging without polluting the environment;
- Observe building supervision instructions, in particular the existing
Ordinance on combustion devices and storage of combustion materials, on
building requirements applicable to installation sites and on ventilation;
- The boiler must be placed on a foundation whose surface area is larger than
the base of the heating boiler according to diagram 1;
- The boiler must be placed in a position which allows for the easiest possible
cleaning and servicing;
- Installation must be carried out according to installation diagram 1 which
shows the boiler housing;
- No objects made of flammable materials or liquids may be placed on/near
the boiler