SunSynk ECCO SUN-3.6K-SG04LP1-EU, Руководство пользователя

Страница: 37 / 70

ECCO SG04LP1 | User Manual 37
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
85%
BATTERY IN/OUT MPPT. GRID.
SOLAR/TURBINE AC load
Battery Grid
Change the letters in each box by moving the
arrows up and down and then select OK. This
will change the name on the home screen.
How to change the name:
Set a number in the auto dim box to dim the
LCD after a number of seconds.
How to set the auto dim:
How to turn the beep on or off:
Mark or unmark the beep box and the press
OK to configure it as you prefer.
5.9. Factory Reset and Lock Code
To access the Settings, click on the gear icon on the right top of the navigation menu.
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
0.0
kWh
85%
BATTERY IN/OUT MPPT. GRID.
SOLAR/TURBINE AC load
Battery Grid
ƒ
Reset status.
ƒ
Whether the ‘lock code’ is used or not.
What this page displays:
ƒ
Reset the inverter to the factory settings.
ƒ
System diagnostics.
ƒ
Change or set the ‘lock code’.
What you can do from this page:
Factory Reset: Reset all parameters of the inverter
Lock out all changes: Enable this menu to set parameters before the unit is locked and cannot be reset.
*Before performing a successful ‘Factory Reset’ and locking the systems, the user must enter a pass-
word to allow the setting to take place. The password for ‘Factory Reset’ is 9999 and for lockout is
7777.