SunSynk ECCO SUN-3.6K-SG04LP1-EU, Руководство пользователя

Страница: 15 / 70

ECCO SG04LP1 | User Manual 15
4.4. Mounting the Inverter
ƒ
Select installation locations that are adequate to support the weight of the converter.
ƒ
Install this inverter at eye-level to allow the LCD to be read anytime.
ƒ
An appropriate ambient temperature is between -25 ~ 60°C to ensure optimal operation.
ƒ
Be sure to keep other objects and surfaces as shown in the figure to guarantee sufficient heat dissipa -
tion and have enough space to remove wires.
ƒ
For proper air circulation to dissipate heat, allow a clearance of approximately 50cm to the side and
100cm to the front.
4.3. System Diagram
ALSO CONSIDER:
ƒ
Installing the indoor unit, outdoor unit, power supply cable, transmission cable, and remote control cable
at least 1 metre away from any television or radio receiver. This will prevent TV reception interference or
radio noise. This will prevent radio signal interference from external units that might interfere with the
Wi-Fi or GSM monitoring.
ƒ
If children under 10 years old may approach the unit, take preventive measures so that they cannot
reach and touch the unit.
ƒ
Install the indoor unit on the wall where the height from the floors is higher than 1600mm.
ƒ
For proper heat dissipation, allow a clearance of approximately 500mm to the side, 500mm above and
below the unit, and 1000mm to the front of the unit.