i Series
User Manual
6
Adjusting The Microscope Focus
•
Twist the knob on the microscope forward and backward to lower and raise the head .
This will allow you to focus the microscope on the welding stylus .
•
Place your finger under the welding electrode to help judge the correct focus loca-
tion . Focus the microscope until the texture on the skin of your finger is clearly visible .
Power Supply Setup
Power Supply Support Mount Brackets
The Orion i3 power supply can either be mounted to a flat vertical surface (such as a wall or the side of a desk) using
mounting brackets; or rest on a flat horizontal surface . Keep in mind that the Power Supply will need to be mounted in
proximity to the Adjustable Arm .
Mounting Brackets:
It is recommended to attach the brackets to a stud in the wall or other structurally sound
vertical supports .
•
Mount a bracket to the wall in the orientation indicated using the two
provided screws with washers .
•
Remove the power supply from its protective foam .
•
Lower the power supply onto the pins protruding
139-1685-4983