i Series
User Manual
16
Pre-Weld delay
These buttons set the time between weld trigger and weld initiation .
•
Short: Sets a quarter second delay before initiating the weld .
•
Medium: Sets a half a second delay before initiating the weld .
•
Long: Sets a one second delay before initiating the weld .
taCK energy slIder
This slider adjusts the amount of weld energy that is being used . In order to precisely adjust the energy, click the keypad
icon to enter keypad mode .”
footer BUttons
The buttons along the bottom of the Parameter Area are displayed at all times .
Weld ON/OFF
- Pressing the icon toggles between Weld OFF and Weld ON . If the icon shows “WELD ON”, the weld sequence
can be initiated and welds can take place . When the icon shows “WELD OFF”, welds will not be able to initiated .
Undo
- The Undo icon allows the user to go back through the 5 previous settings changed .
Redo
- The Redo icon allows the user to cycle forward after pressing undo .
Reset
- The Reset icon resets all the variables and parameters on the screen back to the factory
default settings .
Touch Detect
- In Touch Detect, the welder will initiate the weld process any time that a grounded
work-piece makes contact with the electrode . When this button is selected, the “Pedal” button
will be greyed out .
Foot Pedal
- When Foot Pedal is selected, the welder will only initiate when the Foot Pedal is
pressed . Move the grounded work-piece into contact with the electrode, hold still, and press the
foot pedal to initiate the weld . This can be useful for the ability to weld complex parts without
worrying about accidentally triggering a weld before getting into position . When this button is
selected, the “Touch” button will be greyed out .
MINI- SCREEN AREA
The Mini-Screen Area allows users to customize the Home Screen by choosing from a list of modes that will be displayed
in the area for quick access to various weld control parameters, system settings, and information; all without leaving the
Home Screen . Push the drop-down arrow to bring up the list of viewable options . The current option will be highlighted in
blue . There are different options based on whether you are in Basic, Arc or Tack screen .
139-1685-4983