SunStar KM-1640BL-7, Руководство пользователя

Страница: 19 / 36

19
55
Preparations for sewing
5.1) Installing needle
A. Insert the bobbin into the bobbin case. Later, insert
the thread into the thread groove
①
and place it
under the spring
④
of thread adjusting plate.
B. Inserting and removing the bobbin case
Insert into the hook by grabbing the bobbin case
handle
①
. Pull out the handle
①
when you
remove the bobbin. (The bobbin
②
removes itself
when you release the handle.)
[Fig. 5-2]
Move the needle upper end so that it directly touches
the upper side of the stopper hole
②
when the groove
①
of the needle is on the left. Then, use the clamp
screw
③
to fix the position of the needle. (Refer to
figure 5-1)
5.2) Bobbin Insertion and Removal
[Fig. 5-1]
Always turn off the power when mounting a needle.
If the pedal is accidentally stepped, the machine might unexpectedly operate, causing injury.
Caution
Make sure to turn off the power switch when removing the bobbin case.
If the pedal is accidentally stepped, the machine might unexpectedly operate, causing injury.
Caution
③
②
①
①
③
②
④