8
OTHER MALFUNCTIONS
• The Sunshower does not start properly with a UV session
If the UV lamps are still warm from an UV (or IR) session, they cannot be
immediately restarted. It is therefore important that the Sunshower fully
completes the cooling period following a session, also after an IR session. If that
does not happen, do wait for 15 minutes before starting another UV session.
• The Sunshower drops out during a UV session
The gas-discharge lamps are sensitive to dips in the mains voltage (longer than
10 ms). This may cause the Sunshower to drop out during a UV session. If this
happens, press the Stop button and allow the UV lamps to cool. The session can
be resumed when the cooling period is over.
DISPOSE OF THE SUNSHOWER
Electrical and electronic products cannot be disposed of with the normal
household waste. Dispose of the unusable product according to the valid legal
regulations.
CONCLUSION
Enjoy the positive effects of well-dosed sunlight and direct infrared heat.
Sunshower wishes you many hours of pleasure with this product. Should you
have any suggestions or complaints, please do not hesitate to contact us.
Send us an email at [email protected] or +31 (0)20 46 21 460.
TECHNICAL SPECIFICATIONS
Volt/Frequency
230 V~ / 50Hz
Power
1995
W
Dimensions (bhd)
300 x 1450 x 200 mm
Temperature range
10°C - 40°C
Humidity range
20% - 100%
Installation height
Max. 2000m above sea level
Net
weight
20
kg
UV class
Type 3
Isolation class
II (double insulated)
UV lamp power
400 W
Lamp type
3x UV Philips HPA Cleo Swift 250-500
4x
IR
500
W
Certification
USER MANUAL COMBI | P1011 REV F
