sunjoe SPX7000E, Руководство по эксплуатации

Страница: 15 / 20

3. Insert the new filter assembly inside the dust tank cap.
Replace the dust tank in the unit and resume working.
4. Instead of replacing, the dust filter assembly can also be
washed. Use a screw driver to remove the 3 screws that
secure the black retainer, take out the floating ball
(Fig. 30).
5. Rinse the dust filter, floating ball and the retainer with
warm water, and reassemble the filter assembly.
Disposal
Recycling the Pressure Wet/
Dry Vacuum
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
S Support
If your Sun Joe
®
SPX7000E electric pressure wet/dry
vacuum requires service or maintenance, please call the Snow
Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
S P X 7 0 0 0 E
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
Fig. 29
Filter assembly
Filter handle
Dust tank cap
Fig. 30
Filter
Floating ball
Retainer
15