7. Do not abuse the cord. Never pull the pressure washer
+ wet/dry vacuum by the cord or yank the cord to
disconnect it from the receptacle. Keep the cord away
from heat, oil, and sharp edges.
Risk of electrocution
• Inspect cord before using.
•
Do not use if cord is damaged.
• Keep all connections dry and off the ground.
•
Do not touch plug with wet hands.
•
Keep cord away from heat and sharp edges.
• Do not spray electrical apparatus and wiring.
Risk of explosion
• Do not spray flammable liquids.
• Do not use acids, bases, solvents, or any flammable
material in this product. These substances can cause
physical injuries to the operator and irreversible damage to
the machine.
Additional safety instructions
• High-pressure: keep clear of nozzle.
• Injection hazard: equipment can cause serious injury if the
spray penetrates the skin.
• Do not point the gun at anyone or at any part of the body.
• In case of skin penetration, seek medical aid immediately.
• Before servicing, cleaning, or removing any parts, shut off
the power and relieve pressure.
• This machine is not suitable for connection to the potable
water mains.
• Use the handle to transport the unit. Do not lift the machine
by the dust compartment handle.
Product Description
Purpose
• This electric high pressure washer is intended for residential
use only. It is designed for medium-to-heavy duty cleaning
jobs on boats, motorcycles, RV’s, ATV’s, trailers, decks,
barbecues, siding, patio furniture, and more.
• This electric wet/dry vacuum is designed to clean hard
surfaces as paved paths, courtyards and terraces. It is only
suitable for vacuuming light materials such as grass, leaves,
small twigs and pieces of paper. The vacuuming of heavy
materials such as metal, stones, branches and broken glass
is expressly excluded.
Areas of application
• Never use the machine in potentially explosive areas under
any circumstances!
• The operating temperature must be between 32ºF (0
ºC) and
104ºF (40ºC).
• The machine consists of an assembly with a pump, which
is encased in a shock-absorbing housing. To provide the
operator with an optimal working position, the machine is
equipped with a spray wand and a non-slip handle grip,
whose shape and configuration comply with applicable
regulations.
• Do not cover or modify the spray wand or the spray nozzle
in any way.
• The high-pressure electric power washer is designed to be
used with cold or lukewarm water; higher temperatures can
damage the pump.
• Do not use water that is dirty, gritty, or contains any
chemical products, as such impurities could impair
operation and shorten the life of the machine.
(B) Connect plug and receptacle
Cord set
Appliance cord
(A) Tie cord as shown
Table 1. Method of Securing Extension Cord
4
Содержание SPX7000E
Страница 18: ...NOTES 18 ...