sunjoe SPX7000E, Руководство по эксплуатации

Страница: 7 / 20

Unpacking
Carton Contents
• Electric pressure Wet/dry vacuum
• Handle
• Two (2) large Phillips head screws (for handle)
•
Spray wand
• Trigger gun
• Trigger gun holder
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Garden hose adapter (female coupler)
• 5-ft wet/dry vacuum hose
• Extension tubes (2)
• Furniture brush
• Crevice dusting brush
•
Wet/dry bristle brush
• Wet/dry floor brush
•
Manuals with registration card
1. Carefully remove the pressure wet/dry vacuum
and check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure wet/dry vacuum. The packaging is
made of recyclable materials. Properly dispose of these
materials in accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the holder into position and secure it to the unit with
two large screws (Fig. 1).
Fig. 1
Handle
2 large
screws
2. Slide the trigger gun holder into position (Fig. 2).
Connect as Pressure Washer
1. Fit the spray wand into the gun and rotate it until the two
parts are completely locked (Fig. 3).
2. Connect the silver end of the high-pressure hose to the
trigger gun and twist the nut as indicated to secure the
connection (Fig. 4).
Fig. 2
Trigger
gun
holder
Trigger gun
Spray wand
Fig. 3
7