Sungrow SG36CX-US, Руководство пользователя

Страница: 58 / 109

48
O Ou utte err d diia am me ette err D D((m mm m))
S Se ea all
4.5~6 c
6~12 a+b
12~18 b
Step 3 Strip the insulation layer of the Ethernet cable with a wire stripper, and insert the signal
wires to the RJ45 connector. Crimp the RJ45 connector with a crimping tool.
Step 4 Insert the RJ45 connector to the RJ45 jack.
Step 5 If other wiring operations need to be performed on the communication board, finish the
wiring operations before performing the following steps. If otherwise, continue to
perform the following steps.
Step 6 Install the junction box, see
"
5.7.2 Install the Junction Box
"
.
Step 7 Pull the cable gently to make sure it is secured, tighten the swivel nut clockwise.
-- -- E En nd d
5 Electrical Connection User Manual