Sungrow SG36CX-US, Руководство пользователя

Страница: 57 / 109

47
Step 5 Insert the terminal base into the corresponding terminal.
Table 5-3 Terminal definition
N No o D De effiin niittiio on n
1 RS485 A+
2 RS485 A+
3 RS485 B-
4 RS485 B-
Step 6 If other wiring operations need to be performed on the communication board, finish the
wiring operations before performing the following steps. If otherwise, continue to
perform the following steps.
Step 7 Install the junction box, see
"
5.7.2 Install the Junction Box
"
.
Step 8 Pull the cable gently to make sure it is secured, tighten the swivel nut clockwise.
-- -- E En nd d
5.9.4 Connection Procedure (RJ45 Ethernet Port)
Step 1 Remove the communication junction box, see
"
5.7.1 Remove the Junction Box
"
.
Step 2 Loosen the swivel nut of the junction box and select an appropriate seal according to
cable outer diameter. Lead the cable through the swivel nut, seal, and junction box
successively.
User Manual 5 Electrical Connection