background image

User's Manual

4

Your Sun

Þ

 re Subwoofer should reach 

you in perfect con di tion. If you do notice 
any ship ping dam age, please contact 
your Sun

Þ

 re Dealer im me di ate ly.

Gently lift out the unit and remove all 

the packing material. It is im por tant to 
save all the packing ma te ri als and the 
box in case your subwoofer ever needs 
to be moved or shipped for repair.

Make sure that you keep your sales 

receipt. It is the only way to establish 
the duration of your Limited Warranty 
and it may come in useful for insurance 
pur pos es.

Please take a moment to 

Þ

 ll out and 

mail the Sun

Þ

 re Customer Response 

card. Also read the serial num ber located 
on the control panel and record it here:

Unpacking

Features

•    2,700 watt, high ef

Þ

 ciency ampli

Þ

 er

•    High gloss, dark rosewood 

Þ

 nish

•    Automatic Room Equalization mode
•    Measurement Microphone included
•    Very low distortion
•    Long throw, premium quality drivers
•    Stunning output from a small cube!
•    Automatic signal-sensing turn-on and 

standby mode

•    12 VDC trigger input for remote turn-on 
•    Balanced XLR input
•    Line level unbalanced inputs
•    Speaker level binding post inputs
•    Line level high-pass outputs
•    Continuously variable phase control
•    Continuously variable crossover fre-

quency adjustment, 35 to 100 Hz 

•    Continuously variable volume level 

control

•    Soft clipping circuit allows graceful 

overload and prevents speaker dam age 
due to clipping

•    Gold-plated inputs and outputs.

Dear Friend:

Thank you for purchasing my Sun

Þ

 re 

True Subwoofer EQ. I hope you enjoy 
it and the music it makes as much as I 
have enjoyed creating it for you.

The big breakthrough features of 

the subwoofer are its uncanny track-
ing downconverter, its long throw, high 
back-electromotive force driver, and its 
fully automatic room equalizer. Taken 
together, they provide this sub woof er with 
as much bass as you could get from sev-
eral 15 inch drivers mount ed in a cabinet 
the size of a small re frig er a tor.

Introduction

Care

To maintain the speaker cabinet’s 

Þ

 n-

ish, 

Þ

 rst unplug the power cord and then 

use a soft cloth to clean the sur fac es.

To keep the large rubber surrounds soft 

and supple for 20 years or more, treat 
them with MINK OIL, avail able at most 
shoe repair stores. Unplug the power 
cord, and rub a generous amount into the 
surrounds with a soft cloth about once 
a year (more often if you live in a dry 
climate).

If your Sun

Þ

 re Subwoofer needs ser-

 vic ing, please read the Trou ble shoot ing 
section on page 21. If a problem still 
persists, contact your near est au tho rized 
Sun

Þ

 re Dealer.

Serial Number:                                                

Purchased from:                                              

                                                                       

                                                                       

Date:                                                                      

Содержание EQ Signature

























Отзывы: