background image

User's Manual

11

Your subwoofer is designed to be 

placed in a corner and this will produce 
optimum performance. 

#1    is very good positioning.

#2   is also excellent but may shake 

the back wall too much and cause 
things on or along the wall to rattle 
too much. If this occurs, use the #3 
position:

#3   Move the subwoofer ap prox i mate ly 

three feet away from the right wall 
and place it along the back wall 
as shown. This will substantially 
reduce the rattling of the back wall 
and will still pres sur ize the room 
with lots of bass.

Ex per i ment with at least two corners 

and decide which is the best, or you can 
try the following procedure:

1.    Start by placing the subwoofer right 

on the seat of your favorite couch 
or easy chair. Take care to position 
it so it is not likely to fall off. (This 
method may seem a bit odd, but it 
is based on principles of acoustic 
physics.)

2.    If you are using the subwoofer as 

part of a Home Theater system, 
you can either run a calibration 
test (noise) signal through the 
subwoofer, or simply plug the 
analog outputs of a CD player di-
rectly into the subwoofer’s line level 
inputs. Turn down the subwoofer's 
volume level before turning on the 
CD, then play some of your favorite 
music samples with heavy bass.

3.    Walk around the room, listening, 

and stand in all the positions where 

Location

you might be able to place the 
subwoofer. Try crouching down, 
and try the corners. Find the place 
where the subwoofer's bass output 
sounds the loudest.

4.    Shut things down and install the 

subwoofer in this position. Make 
sure the control panel is not touch-
ing anything, and that it can receive 
good ventilation.

Although low frequencies are non-di-

 rec tion al, factors such as room re 

ß

 ec -

tions, standing waves, resonance and ab-
 sorp tion will strongly affect your subwoof-
er’s per for mance. Moving the subwoofer 
from one location to another can have a 
major effect on the bass response.

The Auto EQ mode will let you adjust 

for the room effects, but you should 

Þ

 nd 

the best location 

Þ

 rst.

Remember to keep the subwoofer 
at least two or three feet away from 
any TV screen, computer, VCR or 
mag net ic tapes and discs. This will 

reduce the chance of the magnetic 

Þ

 elds 

upsetting the TV screen or erasing your 
magnetic media.

Using Two Subwoofers

If you wish to use two subwoofers, the 

sound output will double (an increase of 
6 dB). Locate the subwoofers with one 
in each corner and ex per i ment with the 
location and phase control to achieve the 
best bass response.

Always drive each subwoofer through 

the Left/Mon input even though you are 
driving one subwoofer with a right chan-
nel drive and the other with a left channel 
drive. If your pream pli 

Þ

  er has a single 

sub/LFE output, use a Y cable to split it 
into two outputs. 

Содержание EQ Signature

























Отзывы: