User's Manual
2
Safety In struc tions
1. Read In struc tions
-– All the safe ty and
op er a tion instructions should be read before
the Sun
Þ
re Com po nent is operated.
2. Retain Instructions
— The safety and
operating in struc tions should be kept for
future reference.
3. Heed Warnings
— All warnings on the
Com po nent and in these op er at ing in struc -
tions should be followed.
4. Follow Instructions
— All operating and
other in struc tions should be followed.
5. Water and Moisture
— The Compo-
nent should not be used near water - for
example, near a bathtub, wash bowl, kitchen
sink, laundry tub, in a wet base ment, or near
a swim ming pool, etc. This Component is
intended for use in Moderate climates. Do
not use in Tropical climates.
6. Ventilation
— The Component should
be situated so that its location or position
does not interfere with its proper ven ti la tion.
Ensure a minimum distance of 2 inches
(5 cm) around the Component for suf
Þ
cient
ventilation. For example, the Component
should not be situated on a bed, sofa, rug,
or similar surface that may block any ven ti -
la tion; or placed in a built-in installation such
as a bookcase or cabinet that may impede
the
ß
ow of air. Ensure that the ventilation is
not impeded by covering the control panel
with items such as newspapers, table-cloths,
curtains, shaggy dogs, sleeping cats etc.
7. Heat and Flames
— The Com po nent
should be situated away from heat sources
such as radiators, or other devices which
produce heat. Do not place naked
ß
ame
sources, such as lighted candles on top of,
or near the Component.
8. Power Sources
— The Com po nent should
be con nect ed to a power supply only of the
type de scribed in these op er a tion in struc -
tions or as marked on the Com po nent.
9. Power Cord Protection
— Power-supply
cords should be routed so that they are
not likely to be walked upon or pinched by
items placed upon or against them, paying
particular at ten tion to cords at plugs, con-
ve nience re cep tacles, and the point where
they exit the Com po nent.
10. Cleaning
— The Com po nent should
be cleaned only as recommended in this
manual.
11. Non-use Pe ri ods
—The pow er cord of
the Com po nent should be un plugged from
the outlet when unused for a long pe ri od
of time.
12. Ob ject and Liq uid En try
— Care
should be taken so that objects do not fall
into and liquids are not spilled into the in-
side of the Com po nent. Do not expose the
Component to dripping or splashing from
liquids. Do not place objects
Þ
lled with
liquids on top of, or near the Component.
For example, no vases, glasses of wine,
or cans of pop.
13. Damage Re quir ing Service
— The
Com po nent should be serviced only by
quali
Þ
ed service per son nel when:
A.
The power-supply cord or the plug has
been dam aged; or
B.
Objects have fallen, or liquid has spilled
into the Component; or
C.
The Com po nent has been exposed to
rain; or
D.
The Com po nent does not appear to oper-
ate normally or exhibits a marked change
in per for mance; or
E.
The Component has been dropped, or its
cabinet damaged.
14. Servicing
— The user should not at-
tempt to service the Component beyond
those means de scribed in this op er at ing
manual. All other ser vic ing should be
referred to quali
Þ
ed service personnel.
Содержание EQ Signature
Страница 24: ...Manual part number 913 103 00 Rev B ...