Installation and Operation Manual
SA-07-11-87, Rev A
38
January 2019
Assembly (All Configurations)
1.01 For configurations which require a
throat bushing, turn the seal housing
over to access the bottom. Insert (2)
spring pins into the holes keeping
the seams of the pins towards the
OUTSIDE of the seal housing.
NOTE:
Seams of the spring pins
must point away from the
center of the seal housing.
1.02 Bolt (2) lifting brackets to the seal
housing using (2) bolts per side,
finger tight (each bracket is unique,
and must go on the correct side).
DO NOT TIGHTEN THE LIFTING
BRACKET BOLTS YET.
NOTE:
Motor/Bearing Box/Cartridge
Seal Housing/ Seal removed
for clarity:
1.03 Install the Lifting Hanger using (2)
bolts/nuts per side. Tighten each
size.
NOTE:
Motor/Bearing Box/Cartridge
Seal Housing/ Seal removed
for clarity:
With the Lifting Hanger securely
bolted to the Lifting Brackets, tighten
the Lifting Bracket bolts into the seal
housing.
Spring
Pins