Sunbeam Kettle King, Инструкция пользователя

Страница: 6 / 24

6
Using your Kettle King
®
Before first use
Remove any stickers from the hotplate. Wash
the hotplate and drip tray in warm soapy
water using a mild household detergent. Dry
hotplate and drip tray thoroughly.
To assemble the stand
1. Place the base of the stand on a flat level
surface. With the slots to the bottom,
insert the metal tube into the hole in the
centre of the base and push down firmly.
See figure 1.
2. Place the swivel shelf over the metal tube
with the handle on your left. Slide the
shelf down the metal tube until it rests on
the two plastic pins. See figure 2.
Note: Never attempt to remove the plastic
pins from the metal tube, as these are the
locators for the swivel shelf.
3. Place the top shelf onto the metal tube
with the utensil rack facing away from
you and align it with the swivel shelf. See
figure 3. Push down firmly in the centre of
the top shelf to secure it.
4. Place the base of the Kettle King on the
top shelf and fit it into position. The base
is correctly positioned when it is flush
with the top shelf of the stand on all
sides. See figure 4.
Figure 1
Figure 2
Figure 3
Figure 4