![background image](http://html1.mh-extra.com/html/sunbeam/espresso-vita-em6200/espresso-vita-em6200_instruction-booklet_1393624010.webp)
8
Using the control panel
Power
Press the ‘POWER’ button once to turn the
espresso machine on. The light on the button
will start flashing; this is to indicate that your
espresso machine is on and is heating up.
Ready Mode
When the light on the ‘POWER’ button stops
flashing and turns to a constant red light,
this indicates that the espresso machine is
heated and ready to use. The lights around
the 'MANUAL', 'SINGLE', 'DOUBLE' and
'HOT WATER/STEAM' buttons will show a
constant red light. The machine is now in
Ready Mode.
Note:
Remember that if the light on the
‘POWER’ button is flashing it means
the espresso machine is adjusting the
temperature of the heating system.
To turn the espresso machine off, simply
press the ‘POWER’ button, the red power
light and all other lights on the control panel
will turn off.
Manual
Note:
Before activating the espresso coffee
function ensure that the steam and hot water
control dial is in the OFF position.
The ‘MANUAL’ button allows the coffee
maker to have complete control over the
length of the espresso pour.
Once the espresso machine is switched on
and heated, so the light on the ‘POWER’
button is red and the lights around the
‘MANUAL’, ‘SINGLE’ and ‘DOUBLE’ espresso
buttons show a constant red light, the coffee
maker is able to use the manual operation.
The coffee maker simply needs to press the
‘MANUAL’ button once to start the pour and
again to stop.
Important:
Once the manual operation is
activated, before the espresso pour starts the
pre-infusion feature will release three short
bursts of gradual water pressure onto the
coffee cake. After this the full water pressure
is applied and the espresso will pour freely.
Note:
When the coffee maker has activated
the ‘MANUAL’ operation the lights around the
‘SINGLE’ and ‘DOUBLE’ espresso buttons
will go off. The lights on the ‘POWER’ and
around the ‘MANUAL’ buttons will remain on.
Single Espresso
Note:
Before activating the espresso coffee
function ensure that the steam and hot water
control dial is in the OFF position.
The ‘SINGLE’ espresso function removes the
guesswork and is programmed to pour 30mls
of liquid espresso.
Tip:
We recommend using the single cup
filter when using the programmed ‘SINGLE’
espresso operation.
Once the espresso machine is switched on
and heated, so the light on the ‘POWER’
button is red and the lights around the
‘MANUAL’, ‘SINGLE’ and ‘DOUBLE’ espresso
buttons show a constant red light, the coffee
maker is able to use the ‘SINGLE’ espresso
Содержание Espresso Vita EM6200
Страница 2: ......