![background image](http://html1.mh-extra.com/html/sunbeam/espresso-vita-em6200/espresso-vita-em6200_instruction-booklet_1393624019.webp)
Programming your espresso
machine
The Espresso Vita has programming
capabilities. Based on café settings the
‘SINGLE’ and ‘DOUBLE’ espresso functions
are set at 30 and 60mls. However by
following a few simple steps the coffee maker
can personalise the espresso machine to
achieve a serve of espresso to exactly how
they like it.
Programming Single Espresso
1. To start programming the espresso machine
needs to be in ‘STAND BY MODE’. So the
machine is plugged in and switched on at
the power point, but the machine itself is
not powered on.
2. Prepare the filter handle. Fit the group
handle with the single filter basket (12)
and fill with finely ground coffee (14).
Using the coffee tamp supplied, tamp
the coffee grinds (15). Secure the group
handle to the group head (17)(18).
3. Place a cup under both pouring spouts
(19).
4. To commence programming press and hold
down both the ‘SINGLE’ and ‘DOUBLE’
espresso buttons while still holding down
these buttons briefly press the ‘POWER’
button and release all buttons. The lights
around the coffee buttons will start to
slowly flash, dimming up and down.
5. Press the ‘SINGLE’ espresso button once
to start the espresso pour.
6. Allow the espresso to pour until the desired
level. Once the desired level is reached
stop the espresso pour by pressing the
‘SINGLE’ espresso button. A long beep
will signify that the new setting for the
‘SINGLE’ espresso operation has been
programmed and stored into the machines
memory.
7. The espresso machine will then go into
‘READY MODE’ and is ready to make
espresso at the push of a button.
Programming Double Espresso
1. To start programming the espresso machine
needs to be in ‘STAND BY MODE’. So the
machine is plugged in and switched on at
the power point, but the machine itself is
not powered on.
2. Prepare the group handle. Fit the group
handle with the double filter basket (12)
and fill with finely ground coffee (14).
Using the coffee tamp supplied, tamp
the coffee grinds (15). Secure the group
handle to the group head (17)(18).
3. Place two cups under each pouring spout
(19).
4. To commence programming press and hold
down both the ‘SINGLE’ and ‘DOUBLE’
espresso buttons while still holding down
these buttons briefly press the ‘POWER’
button and release all buttons. The lights
around the coffee buttons will start to
slowly flash, dimming up and down.
5. Press the ‘DOUBLE’ espresso button once
to start the espresso pour.
6. Allow the espresso to pour until the desired
level. Once the desired level is reached
stop the espresso pour by pressing the
‘DOUBLE’ espresso button. A long beep
will signify that the new setting for the
‘DOUBLE’ espresso operation has been
programmed and stored into the machines
memory.
7. The espresso machine will then go into
‘READY MODE’ and is ready to make
espresso at the push of a button.
Resetting the Factory Settings
To revert back to the original factory settings;
1. Insert the power cord into a 230-240V AC
power outlet and switch the power ‘ON’.
17
Содержание Espresso Vita EM6200
Страница 2: ......