Sun Oracle Sun Server X4-2, Руководство по обслуживанию

Страница: 262 / 276

248 Sun Server X4-2 Service Manual • May 2014
■
“Memory Device Components” on page 232
■
“Power Unit Components” on page 233
■
“Processor Components” on page 235
■
“System Board Components” on page 235
■
“Hard Disk Drive Components” on page 238
Memory Events
The following table lists memory events.
Messages and Descriptions Sensor Name
SNMP Message: sunHwTrapSensorNonCritThresholdExceeded
Oracle ILOM Message: Upper noncritical threshold exceeded
Severity and Description: Minor; A sensor has reported that its value has gone
above an upper non-critical threshold setting or below a lower non-critical
threshold setting. This generic ’sensor’ trap is generated when the SNMP agent
does not recognize the component type. The sunHwTrapThresholdType object
indicates whether the threshold was an upper or lower.
/SYS/VPS_CPUS
/SYS/VPS_MEMORY
SNMP Message: sunHwTrapSensorThresholdOk
Oracle ILOM Message: Upper noncritical threshold no longer exceeded
Severity and Description:
Informational; A sensor has reported that its value is
in the normal operating range. This generic ’sensor’ trap is generated when the
SNMP agent does not recognize the component type.
/SYS/VPS_CPUS
/SYS/VPS_MEMORY
SNMP Message: sunHwTrapComponentFault
Oracle ILOM Message: event fault.cpu.intel.quickpath.link_slow
Severity and Description:
Major; A component is suspected of causing a fault.
This generic ’component’ trap is generated when the SNMP agent does not
recognize the component type.
/SYS/MB
SNMP Message: sunHwTrapComponentFaultCleared
Oracle ILOM Message: event fault.cpu.intel.quickpath.link_slow
Severity and Description: Informational; A component fault has been cleared.
This generic ’component’ trap is generated when the SNMP agent does not
recognize the component type.
/SYS/MB
SNMP Message: sunHwTrapComponentFault
Oracle ILOM Message: event fault.cpu.intel.quickpath.unknown-errcode
Severity and Description: Major; A component is suspected of causing a fault.
This generic ’component’ trap is generated when the SNMP agent does not
recognize the component type.
/SYS/MB