Sun Microsystems ZFS, Руководство по установке

Страница: 30 / 108

Prerequisites
Refer to the poster that shipped with the product or the Sun ZFS Storage 7x20 Service Manual
located on http://wikis.sun.com/display/fishworks (
http://wikis.sun.com/display/
fishworks
) for an overview of your disk shelf.
■
Sun Disk Shelf Overview - view component diagrams and specifications
Tools and Equipment Needed
To install the shelf, you need the following tools:
■
You will need a No. 2 Phillips head screwdriver that is a minimum of 4 inches long.
■
A mechanical lift is highly recommended because the chassis can weigh between 91-170 lbs.
(42-77kg). At least three people are required: two to install the shelf or controller and one
spotter to engage the rails.
■
:If a mechanical lift is not available, remove the power supplies, SIM boards and hard disk
drives to reduce the weight, see Sun Disk Shelf Maintenance Procedures and Controller
Maintenance Procedures for instructions included in the Sun ZFS Storage 7x20 Service
Manual on
http://wikis.sun.com/display/fishworks. (
http://wikis.sun.com/display/
fishworks.
)
Use one of the following racks for the Sun Disk Shelf.
■
Sun Rack 900/1000 cabinet
■
Sun Fire cabinet
■
Sun StorEdge Expansion cabinet
■
Sun Rack II 1042/1242 cabinet
■
Any 19-inch wide, 4-post, EIA-compatible rack or cabinet with a front-to-back depth
between vertical cabinet rails of 61 cm to 91 cm (24 in. to 36 in.). The cabinet can have
threaded or unthreaded cabinet rails.
Position the rack where the shelf is to be installed adjacent to the rack where the controller is
installed, if separate. Stabilize the cabinet and lock the casters.
Sun Disk Shelf
Sun ZFS Storage 7x20 Appliance Installation Guide • November 2010 30