Sun Microsystems ZFS, Руководство по установке

Страница: 29 / 108

After you install and route the cables through the assembly, attach the hook and loop straps (1)
to secure the cables. Then attach the right and left outer latches to support the assembly.
Sun Disk Shelf
Precautions
Observe the following cautions when installing a Sun Disk Shelf into a rack using the rail
assembly in the bolt-on rack mount kit. Note that if your rack mount kit shipped with
installation instructions, use those instructions instead.
■
Always load equipment into a rack from the bottom up so that it will not become top-heavy
and tip over. Deploy the anti-tip bar to the prevent the rack from tipping during equipment
installation.
■
Ensure that the temperature in the rack does not exceed the controller's maximum ambient
rated temperatures. Consider the total airflow requirements of all equipment installed in the
rack to ensure that the equipment is operated within its specified temperature range.
5
Sun Disk Shelf
Chapter 2 • Installation 29