Sun Microsystems W1100z, Руководство пользователя

Страница: 76 / 106

4-28 Sun Java Workstation W1100z and W2100z User Guide • January 2005
4.5.5 Replacing or Adding DIMMs
This section contains instructions for removing and installing a dual in-line memory
module (DIMM). See
FIGURE 4-21
when performing this procedure.
Note – Except for the single-DIMM configuration, memory modules must be
installed and removed in pairs, observing sequential slot positions. Three-DIMM
configurations are not supported.
For CPU 0, populate DIMM sockets 3 and 4 first, followed by sockets 1 and 2. For
CPU 1, populate DIMM sockets 7 and 8 first, followed by sockets 5 and 6.
Note –
Before removing any DIMMs from the motherboard, create a backup file to
preserve any important data.
4.5.5.1 Replacing DIMMs
To remove a DIMM:
1. Turn off the system and all of the peripherals connected to it, then unplug the AC
power cord from the system.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, non-slip surface.
4. Identify the location from which you will remove a DIMM.
5. Remove the DIMM by pressing down on the ejector bars at both ends of the
DIMM socket.
Note – Place your forefingers on the top of the DIMM before pressing down on the
ejector bars, to gently disengage the DIMM from the socket.