Sun Microsystems W1100z, Руководство пользователя

Страница: 53 / 106

Chapter 4 Maintaining the Workstation 4-5
FIGURE 4-1
Removing the Left-Side Panel
4.3.2 Removing the Front Bezel
See
FIGURE 4-2
when performing this procedure.
To remove the front bezel from the workstation:
1. Remove the CD/DVD drive as instructed in Section 4.5.2, “Replacing a CD/DVD
Drive” on page 4-12 .
2. Remove the filler panel in the second 5.25 inch bay (if a second drive is not
installed).
3. After the CD/DVD drive and filler panel are removed, reach through the back of
the CD/DVD drive bay and push the retention clips on the top of the bezel
upward. See (1) in
FIGURE 4-2
).