Sun Microsystems Sun Netra CP3220, Руководство пользователя

Страница: 57 / 135

Chapter 2 Hardware Installation and Service 2-23
If an ESD mat is not available, you can place the blade server on the antistatic
envelope in which it was packaged.
Caution –
Do not place blade servers on top of an antistatic bag unless the outside
of the bag also has antistatic protective properties.
2. Take antistatic precautions: Attach and electrically ground the wrist strap.
Caution – Always wear a grounded antistatic wrist strap when handling DIMMs.
3. Simultaneously pull both spring retainer clips outward from the slot for the
DIMM you want to remove.
4. Grasp the DIMM by the edges, and carefully pull it out of its connector.
Place it in an antistatic bag.
FIGURE 2-6
Removing a DIMM
5. If you are replacing the DIMM you removed with a new DIMM, install it as
described in
Section 2.3.6.2, “Installing a DDR2 DIMM” on page 2-21
.
Note – Before installing a replacement DIMM, verify that the new DIMM is the
same size as its paired DIMM.