Sun Microsystems Sun HPC 3.0, Руководство пользователя

Страница: 46 / 67

(Continuation)
For Host #2 (node5), adapter details :
-
Adp #0 :- serial no = 6527; bus slot = 0;
For Host #3 (node6), adapter details :-
Adp #0 :- serial no = 6269; bus slot = 0;
Press Return to continue:
Confirm
sci_config.hpc
Contents
Compare the list of serial numbers in the
sm_config
output with the serial numbers
in the temporary network map.
If the
sm_config
output conflicts with Section 6 of the
sci_config.hpc
file, stop
execution of
sm_config
(press Control-C) and correct the configuration file. Then
run
sm_config
again and compare its output with
sci_config.hpc
again.
When the contents of the
sci_config.hpc
file are confirmed by the
sm_config
output, press Return to allow
sm_config
to complete execution.
Reboot the Node
The
sm_config
output will also identify which nodes need to be rebooted. Reboot
those nodes.
Verify the New Network
Perform the network verification steps described in Chapter 4 to be certain that the
network still functions correctly.
36
Sun HPC 3.0 SCI Guide
♦
June 1999, Revision A