Sun Microsystems Sun HPC 3.0, Руководство пользователя

Страница: 45 / 67

(Continuation)
== Programming is done ... Please verify the following information:
sciadm $Revision: 2.30 $
DOLPHIN SBus card (SBus2b) found in SBus slot 0 on Board# 0, card slot 0.
Adapter number: 0
NodeId: 220 (0xdc)
Slot Number: 0 (0x00)
System Board Number: 0 (0x00)
Card Slot Number: 0 (0x00)
Adapter Serial Number: 6269
Fcode Version: Revision: 2.18
Fcode checksum: 0x8906bca8
Basic FPGA checksum: 0xaf0c0c7d
Alternative FPGA checksum: 0xaf0c0c7d
== Programming done ... remember to reboot the system when finished
Update
sci_config.hpc
Update the /opt/SUNWsma/sci_config.hpc file to incorporate the information
provided by the
sciconf
output.
Run
sm_config
Execute the
sm_config
command as root on the node that contains the
sci_config.hpc
file.
If possible, do this from a console terminal so you can see the output it generates. If
this is not possible, examine the output in
/var/adm/messages
. The following
example shows the output that would be generated for the four-node, nonstriped
sample configuration shown in Figure 3–1.
Note - Do not press Return when the
sm_config
output pauses. Go to the next
section first.
# /opt/SUNWsma/bin/sm_config -f ../sci_config.hpc
For Host #0 (node3), adapter details :-
Adp #0 :- serial no = 6148; bus slot = 0;
For Host #1 (node4), adapter details :
Adp #0 :- serial no = 6520; bus slot = 0;
Adding or Replacing SCI Adapter Cards
35