Sun Microsystems Sun Fire X2100 M2, Руководство по обслуживанию

Страница: 28 / 128

3-2 Sun Fire X2100 M2 Server Service Manual • December 2006
3.1 Pc-Check Diagnostics Overview
Sun Fire X2100 M2 server diagnostics are contained in the DOS-based Pc-Check
utility. This program can be accessed and executed only from the Sun Fire X2100 M2
Server Tools and Drivers CD. Pc-Check was designed to detect and test all
motherboard components, ports, and slots.
If you encounter any hardware-related error message (such as memory errors or
hard disk errors) on your Sun Fire X2100 M2 server, run one of the following:
■
Advanced Diagnostics Test: A specific hardware component test
■
Immediate Burn-in Test: A Sun Fire X2100 M2 server diagnostic test script
The following procedure describes how to access these test options from the Sun Fire
X2100 M2 Server Tools and Drivers CD.
3.1.1 Accessing the Pc-Check Diagnostics Software
1. Do one of the following, depending on which method you are using to access the
Pc-Check diagnostics software:
■
If your server has a DVD drive installed : Insert the Sun Fire X2100 M2 Server Tools
and Drivers CD into your DVD drive and reboot the system.
■
If you are running the Pc-Check software from a PXE server : Follow the instructions in
Appendix C to set up the PXE server.
The system boots to the Sun Fire X2100 M2 Server Tools and Drivers CD main menu.
2. Type
1
to run the hardware diagnostics software.
The system information loads, the Diagnostics main menu opens, and the following
menu options are displayed:
■
System Information Menu
■
Advanced Diagnostics Tests
■
Immediate Burn-in Testing
■
Deferred Burn-in Testing
■
Create Diagnostic Partition
■
Show Results Summary
■
Print Results Report
■
About PC-CHECK
■
Exit to DOS
To run a specific hardware component test, select "Advanced Diagnostics Test." To
run one of the test scripts supplied by Sun, select "Immediate Burn-in Testing."