Sun Microsystems StorEdge L280, Руководство пользователя

Страница: 56 / 100

3-4 StorEdge L280 Service Manual • February 1998
3.2.4 Loading Tapes
The Autoloader has two internal storage slots behind the magazine (slot numbers 7
and 8) and six slots in the removable magazine (slot numbers 1-6).
1. With the write-protect switch facing out and at the top, load tapes into the
magazine by pushing the tape in and holding it until it “clicks.”
A metal tab will release and lock it into place (
FIGURE 3-2
).
FIGURE 3-2
Loading Tapes Into the Magazine
Caution – Since this is a static-sensitive area, touch the sheet-metal panel on the left
side of the unit for electrostatic discharge. Take care not to touch internal electronics.
Note –
If the metal tab is stuck in the “Up” position, place the corner of the tape on
the tab, and slide the tape into the slot. The latching mechanism will not click since
the tab is already engaged. When tapes are “locked” into the magazine, the tapes
will not fall out if the magazine is turned.
!