Sun Microsystems StorEdge 6920 System, Руководство по началу работы

Страница: 84 / 144

66 Sun StorEdge 6920 System Getting Started Guide • May 2004
Provisioning Storage Using the Default
Configuration
This section describes the procedures for provisioning the system using the default
configuration. The first step, “Creating Volumes” on page 67, must be done before
you can complete the provisioning process.
If you decide to configure the system using the default configuration, you must
create volumes within a storage pool and then assign each initiator in your
environment to one of the volumes. The system provides two wizards to assist you,
the New Volume wizard and the Volume-Initiators Mapping wizard.
The wizards guide you through the steps to create and map a new volume:
■
Selecting a storage pool from which to create the volume
■
Specifying the name and description of the new volume
■
Selecting a storage pool
■
Reserving space for a snapshot
■
Determining the capacity of the volume
■
Mapping initiators to the volume
For more information about the New Volume wizard, go to the online help system
by clicking the Help button. Click the Search tab and type
creating a volume.
Viewing the Default Configuration
Settings
After you complete the initial configuration procedures, you can review the settings
of the Sun StorEdge 6920 system.
Note – You must log in as the
storage
user to modify the default settings. You can
log in as
admin
or
guest
if you want to only view the configuration.
1. Log in to the system as a storage administrator from the Sun Web Console login
page:
user name:
storage
password:
!storage
2. Click SE 6920 Configuration Service.