Sun Microsystems SPARC classic X, Руководство по обслуживанию

Страница: 184 / 198

C-2 SPARCclassic/SPARCclassic X/SPARCstation LX Service Manual • November 1993
2. Return to the operating system environment.
If you are in a windowing environment, exit from it and wait for the operating
system prompt to appear. See the documentation supplied with your windowing
system.
3. Halt the operating system.
See the documentation supplied with your operating system for instructions on how
to halt it.
For example, if you are using the Solaris 2.x operating system:
a. At the system prompt, type
su
and press Return.
b. Type your superuser password and press Return.
4. To inform other system users of your intentions, and to then halt the system use
Step c.
5. To halt the system immediately, continue with Step d.
a. Type
/usr/sbin/sh5
and press Return.
The example above uses 5 minutes for a warning period to other system users.
Use appropriately chosen switch settings to inform other system users of your
intentions (see
shutdown
(
1
)). Continue with Step 4.
b. Type
/usr/sbin/init 0
and press Return.
For example, to halt the system immediately type:
See the documentation supplied with your operating system for instructions on how
to halt it. The system synchronizes the file systems and brings you to either the
>
or
ok
prompt.
If you see the
ok
prompt, skip ahead to step 5; otherwise, continue with step 4.
6. Enter
n
at the
>
prompt to get to the
ok
prompt.
7. Enter
reset
at the
ok
prompt.
8. When you see the system banner, press Stop-a to access the Forth Toolkit.
9. Enter
help diag
at the
ok
prompt to get a list of tests that comprise the On-Board
Diagnostics.
10. Enter the name of the test you wish to execute.
nevada% su
Password: welcome
(Password does not appear on screen.)
nevada# /usr/sbin/init 0