Sun Microsystems PGX32, Руководство по установке

Страница: 41 / 48

25
A P P E N D I X
A
Changing the Console Resolution
This appendix describes how to change the default PGX32 console resolution. This
appendix also includes a troubleshooting section describing possible problems and
answers associated with changing the console resolution.
Reasons for Changing the Console
Resolution
Usually, the default console resolution is sufficient for most users. However, you
may need to change the default resolution if:
■
You change the X Windows depth from the default listed in the table, then you
should configure the console depth to match the X Windows depth.
■
The monitor does not “sync up” at the default console resolution, then you need
to choose a different console resolution.
Guidelines for Changing the Console
Resolution
The general guidelines to follow when changing the default console resolutions are:
■
In order to run the X Windows environment in 8/24 mode, set the console
resolution to 24 bit-depth.
■
By default, console resolutions 1280x1024 and lower will automatically be set to
24-bit. Higher resolutions will default to 8-bit mode.