Sun Microsystems PGX32, Руководство по установке

Страница: 33 / 48

Chapter 3 Configuring the PGX32 Screen 17
Setting PGX32 as the Console (Optional)
To use the PGX32 software as the console device, use the procedures in the sections
that follow.
PGX32 Card as the Only Frame Buffer
Sun Ultra 5 and Sun Ultra 10 Systems
To use the PGX32 card as the system console in an Sun Ultra 5 or Sun Ultra 10
system as the only frame buffer, first disable the 8-bit or 24-bit onboard graphics,
that comes standard with these systems.
● To disable the 8-bit or 24-bit graphics device built into the motherboard, type:
Once the system is reset, all console messages are directed to the PGX32 card.
● To restore the motherboard 8-bit or 24-bit graphics device as the console for any
reason, simply add it back to
pcib-probe-list
by typing:
Sun Ultra 30 and Sun Ultra 60 Systems
If no other frame buffers are present in a Sun Ultra 30 or Sun Ultra 60, then the
PGX32 card is the console by default, provided that the board is in a valid probed
PCI slot.
ok setenv pcib-probe-list 1,3
ok reset
ok setenv pcib-probe-list 1,2,3
ok reset