Sun Microsystems PGX32, Руководство по установке

Страница: 31 / 48

Chapter 3 Configuring the PGX32 Screen 15
Noninteractive Configuration
Sometimes it is convenient to configure the PGX32 card noninteractively. This
method is especially useful when configuring many systems identically or when you
know which configuration is appropriate for the system.
The PGX32 configuration command uses the same conventions as the
m64config
utility.
m64config
is used for all ATI-based graphics which include the Sun Ultra 5
and Sun Ultra 10 motherboard graphics (both 8-bit and 24-bit systems) and PGX
8-bit PCI frame buffer. You can set the parameters using the interactive version by
specifying the correct parameter flag followed by a desired value.
TABLE 3-2
describes
these parameters.
Note –
By default, the bit depth is set to 8/24 for resolutions of 1280
×
1024 and less,
or 8 only for higher resolutions.
TABLE 3-2
Noninteractive Configuration Parameters
Parameter Description
-dev
device Selects the device to configure.
-res
resolution Sets the resolution name. (You may also use
noconfirm
,
nocheck
, and
try
parameters in addition to the resolution
variable.)
-res \?
Shows resolutions.
-file
filename Displays the configuration file:
system
or
machine
.
-depth
depth Shows the bit depth (8 or 24, default is 24).
-defaults
Resets the device to the default parameters.
-24only
(
TRUE
/
FALSE
) Forces all windows to use 24-bit visuals. This may prohibit
some 8-bit applications from working.
-gfile
gamma file Lists the gamma file (currently not supported).
-gvalue
gamma value Lists the gamma value (currently not supported).
-propt
Displays the current settings.
-prconf
Displays hardware information.
-i
Displays graphical user interface.
-help
Shows usage information.