Sun Microsystems Netra 1290, Руководство администратора

Страница: 140 / 146

122 Netra 1290 Server System Administration Guide • May 2006
■
in
sd@5,0
■
5 is the SCSI target number for the drive.
■
0 is the logic unit number (LUN) of the target drive.
This section describes the PCI+ I/O assembly slot assignments and provides an
example of the device path.
TABLE D-5
lists, in hexadecimal notation, the slot number, I/O assembly name, device
path of each I/O assembly, the I/O controller number, and the bus.
where:
■
W is the onboard LSI1010R SCSI controller
■
X is the onboard CMD646U2 EIDE controller
■
Y is the onboard Gigaswift Ethernet controller 0
■
Z is the onboard Gigaswift Ethernet controller 1
■
* is dependent upon the type of PCI card installed in the slot.
Note the following:
■
600000
is the bus offset and indicates bus A, which operates at 66 MHz.
■
700000
is the bus offset and indicates bus B, which operates at 33 MHz.
■
*@3
is the device number. In this example
@3
means it is the third device on the
bus.
TABLE D-5
IB_SSC Assembly PCI+ Device Mapping
I/O Assembly Name Device Path Physical Slot Number I./O Controller Number Bus
IB6 /ssm@0,0/pci@18,700000/*@1 0 0 B
/ssm@0,0/pci@18,700000/*@2 1 0 B
/ssm@0,0/pci@18,700000/*@3 X 0 B
/ssm@0,0/pci@18,600000/*@1 5 0 A
/ssm@0,0/pci@18,600000/*@2 W 0 A
/ssm@0,0/pci@19,700000/*@1 2 1 B
/ssm@0,0/pci@19,700000/*@2 3 1 B
/ssm@0,0/pci@19,700000/*@3 4 1 B
/ssm@0,0/pci@19,600000/*@1 Y 1 A
/ssm@0,0/pci@19,600000/*@2 Z 1 A