Sun Microsystems Netra 1290, Руководство администратора

Страница: 39 / 146

Chapter 2 Configuring the System Console 21
Note – Unlike the example, you will not see the
#.
being typed.
When you type the first character of the escape sequence, there is a one second delay
before the character appears on the screen. During this interval, you must type the
second character of the escape sequence. If the escape sequence is completed within
the one-second interval, the
lom>
prompt appears. Any characters typed after the
second escape character are appended to the
lom>
prompt.
If the second escape character is incorrect, or is typed after the one-second interval
has expired, then all characters are output at the original prompt.
To change the escape character sequence, see “To Change the lom> Prompt Escape
Sequence” on page 41 .
▼
To Connect to the Solaris Console From the
LOM Prompt
●
Use the
console
command from the LOM prompt, then type a carriage return.
■
If Solaris software is running, the system responds with the Solaris prompt:
■
If the system was in the OpenBoot PROM, then the system responds with the
OpenBoot PROM prompt:
■
If the server is in Standby mode, the following message is generated:
# #.
lom>
lom>console
#
lom>console
{2} ok
lom>console
Solaris is not active