Sun Microsystems Enterprise 3 00 Series, Установка и замена

Страница: 9 / 22

Chapter 1 Installation and Component Replacement 1-5
4. Simultaneously pull the ends of both extraction levers outward to unseat the
board connectors from the centerplane receptacles.
1.5.2 Installing a PCI I/O Board
1. If you are installing a new board, refer to your Enterprise server system reference
manual for board slot section guidelines.
2. Open the extraction levers by pulling the ends of both levers toward you.
3. Carefully insert the board in the proper slot in the card cage, ensuring that the
board does not slip out of the left and right card guides (
FIGURE 1-3
).
■
For a front slot in a 16-slot or 8-slot card cage, orient the board component-side
down.
■
For a rear slot in a 16-slot or 8-slot card cage, orient the board component-side up.
■
For a 4- or 5-slot card cage with vertical slots, orient the board with the
component side to the right.
FIGURE 1-3
Board Replacement
Rear view
Front view