Sun Microsystems Enterprise 3 00 Series, Установка и замена

Страница: 13 / 22

Chapter 1 Installation and Component Replacement 1-9
1.6.2 Installing a PCI Card
1. Ensure that the voltage type of the PCI card you are replacing or installing
matches the voltage type of the riser card, either 5.0V or 3.3V.
2. Verify that the JTAG test jumper is removed/disabled (
FIGURE 1-6
).
Note –
PCI+ I/O boards purchased from Sun Microsystems are shipped with the
JTAG test jumper disabled or removed on both of the 5.0V installed riser cards.
FIGURE 1-6
JTAG Jumper