Sun Microsystems Blade X6240, Руководство по установке

Страница: 66 / 72

54 Sun Blade X6240 Server Module Installation Guide • June 2008
Creating a RAID Set to Incorporate a
Preinstalled OS Using the Sun
StorageTek REM Card
The Sun StorageTek REM card enables you to choose from many RAID
configurations. How you configure your system depends on your system
requirements and the available hard disk drives in the system.
This procedure describes how to mirror the preinstalled Windows Server 2003 R2
OS. This is the better option, and all remaining disks (should there be more than 2)
are incorporated into a DATA RAID set using the available options as shown in
TABLE 4-2
.
You will need the Sun Blade X6240 Server Module Tools & Drivers CD (707-0257).
▼
To Incorporate a Preinstalled Windows OS
Using the Sun StorageTek REM Card
Follow these steps to mirror your configured Windows Server 2003 R2 OS:
1. Log in to the server
2. Insert the supplied Tools & Drivers CD and install the SunStorageTek
software.
■
If using Tools & Drivers CD 1.1 or later, an autorun will appear. Click on the
link to install the SunStorageTek RAID management software and follow the
install wizard.
■
If using a Tools & Drivers CD 1.0 or 1.0a, navigate to the following directory
and double-click on the executable to install the software:
<cdrom drive>\RAIDmgmt\StorageTEK\Windows\32|64bit\
3. Start the application.
4. Click on the screen to activate the Managed Systems list.
5. Log in at the prompt.
Type
root
for the user name. Type the OS password that was assigned during
Windows installation.