Sun Microsystems Blade X6240, Руководство по установке

Страница: 19 / 72

Chapter 1 Setting Up the Server Hardware 7
▼
To Shut Down Main Power Mode
To power off the server module from main power mode, use one of the following two
methods:
■
Graceful shutdown.
Use a ballpoint pen or other stylus to press and release the
Power button on the front panel. This causes Advanced Configuration and Power
Interface (ACPI) enabled operating systems to perform an orderly shutdown of
the operating system. Servers not running ACPI-enabled operating systems will
shut down to standby power mode immediately.
■
Emergency shutdown. Press and hold the Power button for four seconds to force
main power off and to enter standby power mode.
When main power is off, the blue (Ready to Remove) LED on the front panel will
be illuminated, indicating that the server module is in standby power mode.
Note – To power off the server module completely, you must disconnect the AC
power cords from the back panel of the chassis. This will remove power from all the
blades in the chassis.