Summit 2175 L, Инструкция по установке, эксплуатации и обслуживанию

Страница: 36 / 44

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
30 SUMMIT PUMP MODEL 2175
Figure G-4 Figure G-5
3. After placing the coupling guard half (pump end) around the pump end plate, secure
it with a bolt, nut and two (2) washers through the round hole in the front end of the
guard half as shown in Figure G-6 . Tighten securely. (See Figure G-7 .)
Figure G-6 Figure G-7
4. Slightly spread the bottom of the coupling guard half (driver end) and place it over
the coupling guard half (pump end) so that the annular groove in the coupling guard
half (driver end) faces the motor as shown in Figure G-8 .