Battery Installation:
Note: This step is only needed if replacing battery.
1. Locate the battery compartment door on back of monitor.
2. Slide open battery door and insert battery. Ensure correct connection (Figure C). Slide battery door back
in place.
Belt Clip:
For convenience and portability, you can clip the Monitor to your belt or waistband after a battery has been
installed (Figure D).
Footrest:
The Monitor has a built-in footrest for tabletop convenience. Simply flip out footrest and place the Monitor
on a stable, level surface (Figure E).
Pairing MONITOR and CAMERA:
The Monitor and Camera are paired at the factory for privacy reasons. If the Monitor and Camera are not pairing with each other
for any reason, please pair them as described below.
• Turn on camera and parent unit and press “Menu” button on parent unit to enter the camera menu.
• Use the brightness controls to highlight the “ ” icon and press the “Menu” button to bring up a list of the 4 cameras.
• Use the brightness controls to highlight an empty channel. Press the “Menu” button and within 20 seconds, press the “CODE”
button once at the back of the camera. The image from the new camera should appear on the screen within 1 second.
Please bring the camera and receiver close to each other during the
process, to make sure the RF signal is strong enough and to
prevent failure caused by interference.
SET UP & USE continued:
TIPS FOR IMPROVING RECEPTION:
• Position the Monitor closer to the CAMERA if necessary.
•
Move Monitor away from other monitors, cordless phones, walkie-talkies, etc.; moving even slightly could greatly improve reception.
• If you hear a feedback or squealing noise, move the CAMERA and the Monitor further away from each other.
•
Video Sleep Mode:
While operating on battery power, the video screen will go to sleep, to conserve battery power. Audio and
sound lights will function normally. Press the Video On/Off to resume viewing. This option is NOT available when using AC adapter.
•
Sound Lights:
The 4 Sound Lights will illuminate on the Monitor depending on the level of your baby’s sounds. For example, if
your child is just cooing, only one or two lights will illuminate. If your baby is crying, several will illuminate, depending on how loud
they are crying. This feature is particularly helpful if you are in a noisy room.
•
Video On/Off Button:
This button turns the video mode on. If you only want to hear your baby, press the Video On/Off Button
again to shut off the video. The Video On/Off Button is ideal for easily turning on the video option in the middle of the night.
•
Night Vision:
In a darkened room, the Monitor will automatically use its infrared LED’s to transmit a clear image of baby, so you
can see your child at night!
•
Multi-Position Camera/Microphone:
The Camera/Microphone should be positioned so it is facing baby as much as
possible. This multi-position feature is unique to Summer Infant nursery monitors. It allows the microphone to focus on baby’s voice
while filtering out other household noises.
•
Digital Zoom:
Press the Power/Zoom button once to activate the digital zoom, press again to return to full screen view.
•
Two-way talk-back: Hold down button on side of the monitor and talk into the microphone. The child will hear your voice from a
speaker on the camera.
SPECIAL FEATURES:
D
C
E
28456 Slim & Secure Plus IB GB p5.pdf 1 11/10/2012 08:49
